TYPE E Air atomizing nozzles Materials: nickel plated brass, stainless steel 303, stainless steel 316 other materials on request. Available types The E3P model with spray extension (300 mm) and clean out needle is designed for application where the point of spray application is far from the body assembly Internal Mix FULL SIPHON…
TYPE E Air atomizing nozzles Materials: nickel plated brass, stainless steel 303, stainless steel 316 other materials on request. Available types Similar model to E1 but with air and water connection of 1/2” in order to guarantee high capacities. Internal Mix FULL SIPHON CONE Internal Mix FULL CONE UNDER PRESSURE Internal Mix WIDE CONE UNDER…
Characteristics The portable tanks for dispensing Spray or foam, comply to rules PED and CE, are available in painted steel or polished stainless steel in different sizes. All tanks have a regulating valve of pressure and quick connection for spray accessories. Max pressure of exercise is of 6 Bar. To facilitate handling, are all equipped…
Characteristics There are two types: CAPACITY 18 L Hight 565 mm Diameter 232+ -2 mm Weight 4,4 Kg CAPACITY 9 L Hight 341 mm Diameter 232+2 mm Weight 3,65 Kg Materials The pressure tank and the valves are in stainless steel and the cover with a handle in rubber. It isn’t oxidable. Related PDFsTechnical specifcations…
Characteristics Euspray ejectors allow to keep in movement liquid avoiding sedimentation of the solid particles present. The UNIEDU series has been designed following the Venturi principle and have a ratio of about 1:5 between the liquid inlet (pumped) and the outlet from the ejectors. Materials Polypropylene reinforced with fberglass. KYNAR* (special PVDF) AISI316 *KYNAR® is…
Characteristics The quick couplers of the UNIFFA series are mainly used in the lines of pretreatment surface to facilitate and speed up maintenance operations Material Body: polypropylene reinforced with fberglass or KYNAR*. Levers: polypropylene, KYNAR, NYGLASS or sintered AISI304. Seal: EPDM (VITON on request). *KYNAR® is a highly stable, pure PVDF that is extremely resistant…
THREADED CAP Characteristics Closing Nut for ZPL clamps. Material Polypropilene with fber glass Related PDFs
Characteristics The adjustable nozzle ball is used along with the clip-on body and cap. Available in a wide range of flow rates, please see the table below for specifc flows at varying liquid pressures. Customized spray ball sizes and spray tip materials can be considered on request. Polypropylene clip on nozzles are ideal for parts…
Characteristics ZPL clip on bodies are designed to ensure easy installation and reduced maintenance time. Clip-on nozzles are installed by hand. The spray ball can be easily oriented into the preferred position and then locked into place by tightening the threaded cap. The clip-on bodies can be installed on 1″, 1-1/4″, and 1-1/2″ pipe. Material…
Composition • Nozzle holder clip. • Retainer for membrane and check valve membrane. • n° 1 self tapping screw 3.8 x 16 SS303 (V00007005). • n° 1 OR for tang. Related PDFsTechnical specifcations Click on the table to enlarge it
