HYDRAULIC SJSG This new hydraulic electrically actuated spray gun has the same function as the regular hydraulic speedy jet but with some improved features. * C1 and DH nozzles are possible setups up to flow factor 03 (orifice diameter 1.1 mm). HIGHLIGHTS High-speed operation, up to 4500 cycles per minute, is ideal on fast production…
PNEUMATIC SJSG This new pneumatic electrically actuated spray gun has the same function as the regular pneumatic SpeedyJet but with some improved features. * Liquid nozzles up to model B5 can be installed (air nozzles operating by suction or gravity cannot be installed, mod. S). HIGHLIGHTS High-speed operation, up to 4500 cycles per minute, is…
Characteristics The SCP protection screen is used to build water barriers and allows personnel to operate safely near fres. They can be supplied with threaded or flanged connections or with quick couplings. Applications • Water barriers. Materials Carbon steel, AISI 304, AISI 316 Dimensions and Performance The dimensions of the piece may…
Characteristics The WM2 water-mist nozzles are fre protection systems that produce a remarkably ultra-fine water sprays, less than 200 microns. The extremely micro water droplets allow the water mist to control or extinguish fres by cooling of the flame and fre plume, oxygen displacement by water vapor, and radiant heat attenuation. Applications • Active…
Characteristics The WM1 water-mist nozzles are fre protection systems that produce a remarkably ultra-fne water sprays, less than 200 microns. The extremely micro water droplets allow the water mist to control or extinguish fres by cooling of the flame and fre plume, oxygen displacement by water vapor, and radiant heat attenuation. Applications • Active…
Characteristics LANF series foam lances are used for fxed installations and coupled to CAMF series foam chambers. The flanges can be ANSI or UNI Applications • Flammable liquid storage tank protection. Materials Painted carbon steel, Stainless steel . Related PDFsFLOW FACTOR, CONNECTIONS, CAPACITIES AND SPRAY ANGLES Click on the table to enlarge it
Characteristics Foam chambers are mainly employed to protect the roofs of fxed or floating tanks. They provide a glass diaphragm inside the body that denies vapors from entering the foam tubes. The flanges can be ANSI or UNI. Applications • Flammable liquid storage tank protection Materials Painted carbon steel, Stainless steel . Related PDFsFLOW…
Characteristics The BAL model is an airaspirating water-foam nozzle used in low expansion foamwater deluge systems. It is available with connections of 1/2” or 3/4” threaded BSP or NPT. Expansion ratio 1:7 Materials Brass and SS316. Spray type Air-aspirating water-foam, venturi-type body . Related PDFsFLOW FACTOR, CONNECTIONS, CAPACITIES AND SPRAY ANGLES Click on the…
Characteristics Full cone nozzle with uniform spray pattern. Available also with special treatment against wearing. Applications • Continuous casting cooling. • High impact washing. Materials Brass, Aisi303. Other materials on requests . Related PDFsAVAILABLE CONNECTION TYPES 1/4″ , 3/8″ , 1/8″ , 1/2″ FLOW RATE RANGE 0,6 to 54,8 lpm MATERIALS Brass, Aisi303. Other…
1) RH Control 180º Ideal for positioning on the wall and equipped with an automatic spray gun that rotates 180º. 2) RH Control 360º Ideal for ceiling installation, equipped with 2 guns that rotate at 180º, so covering with 2 the 360º. 3) RH Control Dry Mist: This system is equipped with a pressurized tank…
