General description
The P-SF filters polypropylene made are commonly used to solve line filtering problems in plans with a particularly low installation costs. In addition they are installed in circuits with fluids that are aggressive towards aluminium and stainless steel ( e.g. bleach, hydrochloric acid, bromic acid, etc. ).
The P-SF filters polypropylene made are commonly used to solve line filtering problems in plans with a particularly low installation costs. In addition they are installed in circuits with fluids that are aggressive towards aluminium and stainless steel ( e.g. bleach, hydrochloric acid, bromic acid, etc. ).
Technical specifications
| OPERATING PRESSURE | 20 barg MAX |
| FILTRATION DEGREES | From 150 μ to 600 μ |
| DESIGN PRESSURE | 18 barg |
| MAXIMUM OPERATING TEMPERATURE | 70°C |
| INLET / OUTLET FLANGES | Ø 1/2” – 3/4” – 1” female |
Materials
The moulded plastic execution ensure a very effective spare in price without compromising filters high performance in terms of flow rate and pressure.
Filter cartridge
Filter cartridge is stainless steel wire screen mesh in a choice of following features:
– 32 mesh (600 μ) – 50 mesh (300 μ)
– 80 mesh (180 μ) – 100 mesh (150 μ)
Flow rate
Maximum flow rates (m3/h) values with clean water and some typical retention degrees (50 and 100 mesh): see the corresponding pressure drop on the Y axis.
P-SF 3/4 P-SF 5
WEIGHT 0,2 Kg
P-SF 3/4
MAXIUM FLOW RATE
WITH 1 GR/LT OF SUSPENDED SOLID
MAXIUM FLOW RATE
WITH 1 GR/LT OF SUSPENDED SOLID
P-SF 5
MAXIUM FLOW RATE
WITH 1 GR/LT OF SUSPENDED SOLID
MAXIUM FLOW RATE
WITH 1 GR/LT OF SUSPENDED SOLID
