fosfatazione-industriale-foto

Pre-treatment tunnels can involve hundreds of spray nozzles across multiple spraying stations, effective use of the right spray nozzles can considerably improve the overall finish of the product. These nozzles need to be aligned correctly to optimize the spray. Due to the number of stages, the workpiece goes through, and the number of nozzles involved, well-designed spray risers will improve the overall spray performance in the application.

As well as a full range of spray nozzles and accessories, EUSPRAY can help with the election of the correct nozzle and supply custom made spray risers and complete pretreatment spraying systems.

Our range includes nozzles with multiple varieties of connections and fittings – including threaded and quick release nozzles and adjustable nozzle holders – to ensure even parts with complex geometrics are covered evenly.

ADVANTAGES OF OUR NOZZLES FOR PHOSPHATING, PRE-TREATMENT & PAINTING SYSTEMS

  • Nozzles available in plastic, brass and stainless steel
  • Cost-effective
  • Wide choice of flow rates and spray angles available
  • Reduced maintenance costs

NOZZLES FOR PHOSPHATING, PRE-TREATMENT & PAINTING SYSTEMS

FLAT SPRAY NOZZLE KC1

FLAT SPRAY PLASTIC TIPS CharacteristicsTheir particular shape facilitates the ease to set the jet orientation.Low costs of replacement.The orifice is protected by the particular geometry of the nozzles.Spray angle available are: 80º and 110º. Other spary angle under request. Applications • Washing.• Cooling.• Surface treatment.• Lubrication.• Agriculture. Material POM.

NOZZLE BALL ADJUSTABLE DPL MODEL

Characteristics   The nozzle ball adjustable is easily mountable on the clamps ZPL series and through NPL locking ring. Available with a wide range of flow rates ranging from 3.9 to 22.3 lpm at 3 bars, the standard spray angle is 60º. Customized versions are available on request and with a capacity on demand and eventually can be supplied with…

SINGLE AND DOUBLE SPRING PIPE CLAMPS – ZPL MODEL

Characteristics Pipe clamps “ZPL”series are designed to ensure easy installation and reduced maintenance time. The assembly clamp-nozzle-ring is mounted on the collectors only with the use of one or two elastic brackets in AISI. Everything by hand, without any tools, installing the clamp, orienting the nozzle tip and thanks to retainer locks in the desired position. The clamps can be installed…

MC3E FLAT SPRAY NOZZLES

Characteristics Low capacities nozzle one piece construction, male connection Available spray angles: 0°- 15°- 25°- 40°- 50°- 65°- 80°- 95°- 110° Applications Industrial washing Metal surface treating Coal and gravel washing Cooling Degreasing How to Order E.g. 1/8” MC3E 06 80° SS303